Setting the Server and Client Computer LAN Network

Setting the Server and Client Computer LAN Network - Selamat datang di halaman kami 15HITS | Kumpulan Viral Paling Dicari, Pada postingan kali ini kita akan ulas Setting the Server and Client Computer LAN Network, Disini semua telah di siapkan khusus buat anda. Dalam postingan Gambar Computer, Gambar Network, yang sudah dibuat ini, bisa di ambil manfaatnya.

link : Setting the Server and Client Computer LAN Network

Daftar Isi [Buka]

Setting the Server and Client Computer LAN Network - LAN network should be set such that the desired results can be maximized. LAN network to connect computers to each other and can be controlled by a computer server. Or whether or not the quality of the output depending on how the network LAN settings.

Setting the Server and Client Computer LAN Network

Setting Server and Client

After the computers connected in a form of topology (eg Star) then we are ready to make arrangements. Turn on the PC Server (make sure that the PC server is connected to your Internet Broadband Network). Internet connection to the server is done by employees of the Internet Service Provider or if we want to do it themselves, we just ask for dial number password, IP and DNS from the provider after the application of our subscription request is received (look for the safe course is hehehe ...)

Open a command prompt from start menu - programs - accessories - command prompt.
Type in "ping www.google.com" without the quotation marks so ...

If we have a server PC connected to the Internet through speedy then we will get "Reply from 72.14.203.174: ..." means that the connection is successfully received.

Well, now we will be setting up a new network that we did earlier .....

Open a command prompt and type "ipconfig / all" press ENTER (without the quotes). Here will be visible IP Address, DNS server and Default Gateway (NIC 1 and NIC 2's speedy still empty). Record on a sheet of papyrus paper eh :) means those numbers. IP addresses are typically used in class C.

For example, NIC 1 charge:
IP address: 192.168.1.2
Subnet: 255.255.255.0
Gateway: 192.168.1.1 (IP Address in ADSL modem)
DNS server: 202.134.0.15 (DNS from ISP / Speedy)
Alternative DNS: 202.134.0.10

Open the Control Panel - Network connectin. Double click on Local Area Connectin 2 (NIC2)

Find a selection of Internet Protocol (TCP / IP) then click Properties. Click on the Use the Following IP address and then fill in as follows:

IP address: 192.168.0.1
Once completed, click OK and then closse
Subnet: 255.255.255.0
Gateway: 192.168.1.2 (IP Address of the NIC 1)
DNS server: 202.134.0.15
Alternative DNS: 202.134.0.10

Turn on all client computers. For convenience, do the setup from the client machine number 1.

Open the Control Panel - Network connectin. Double click on Local Area Connectin
Find a selection of Internet Protocol (TCP / IP) then click Properties. Click on the Use the Following IP address and then fill in as follows:
IP address: 192.168.0.2 (IP Address client 1)
Subnet: 255.255.255.0
Gateway: 192.168.0.1 (IP Address in the server NIC 2)
DNS server: 202.134.0.15


In the previous post that the NIC 1 is connected to the ADSL modem and NIC 2 is connected to the switch. NIC 2 is what will we share to the client computer.

Before you synchronize data between the PC server and client PC we first fill the IP address on all client computers. Carane .... :

To client 2 and so on, follow the step number 2 above. You can just change the IP address to 3,4,5 ..... ff.

Read previous topic : Client Computer Settings in the Internet Cafes / Online Game & Automatic Shutdown Computer Setting

Itulah Ulasan Kami Tentang Setting the Server and Client Computer LAN Network

Sekianlah informasi tentang Setting the Server and Client Computer LAN Network yang dapat kami bagikan, semoga dapat memberikan manfaat bagi anda.Teriakasih, jangan lupa share dan tuliskan komentar dibawah ini.

Anda sudah melihat postingan Setting the Server and Client Computer LAN Network dengan alamat link https://15hits.blogspot.com/2012/06/setting-server-and-client-computer-lan.html silahkan di copy dan bagikan.